Aloe vera gel is prepared from fresh aloe vera leaves using the maceration method

Oct 13, 2025 by pinkandtrash.com 31 views

The Strength of the Impact Acrylic Resin of Heat Polymerization After Applying Aloe Vera Gel (Aloe Vera) 36% with Different Exposure Time

Introduction

Heat polymerization acrylic resin is a widely used material in the field of dentistry as a bite basis. However, the use of this resin is not without its challenges, one of which is the decrease in material properties, including the impact strength. One method to improve these properties is to apply aloe vera (aloe vera) which has an antibacterial effect due to flavonoids and saponins. This study aims to analyze the difference in the strength of the impact acrylic resin of heat polymerization after being smeared with 36% aloe vera gel with various exposure times, namely 5, 10, and 15 minutes.

Materials and Methods

This study involved making samples measuring 65x10x2.5 mm from heat polymerization acrylic resin, with a total of 10 pieces for each treatment group. The group that was tested was divided into four categories: Group without applying (I), a group smeared with aloe vera gel 36% for 5 minutes (II), for 10 minutes (III), and for 15 minutes (IV). The cast mixture used for making molds is made with a ratio of 200 gr gypsum and 100 ml of water. After the process of drying the cast, the surface of the cast and master plates are smeared with vaseline to facilitate the release of the mold. Acrylic resin is mixed with monomers in a ratio of 9 gr: 3.6 ml, then placed into a mold for polymerization in the waterbath with a temperature of 100 °C for 20 minutes.

After the polymerization process, the sample is polished until smooth and smooth before smeared with aloe vera gel. Aloe vera gel is prepared from fresh aloe vera leaves using the maceration method, and each treatment group is smeared with 10 ml of gel on the entire surface before it is wrapped in plastic during the specified time of processing. Testing the strength of the impact is done using Izod Digital Impact Tester with a swing angle of 20 ° and the weight of a beating 5.5 J.

Results

The analysis results show that the average impact strength for each group is as follows: Group I has a value of 27.21 ± 0.65059 J/m²; group II of 25.39 ± 0.34635 J/m²; group III reached 24.29 ± 0.56204 J/m²; and group IV with a value of 22.42 ± 0.45934 J/m². From the one-way ANOVA test results, it is known that there is a significant difference in the strength of the impact between groups with the value of P = 0.00 (p <0.05).

Discussion

From the results of this study, it can be concluded that the 36% aloe vera gel is negatively affecting the strength of the heat polymerization resin, with the highest impact strength in the group without applying and decreases with the increase in the time of the gel exposure. This shows that although aloe vera gel has good antibacterial properties, its use in acrylic resins needs to be carefully considered so as not to reduce the mechanical strength of the material. Further research is expected to explore the combination of the time of processing and the concentration of gel to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material.

Conclusion

In conclusion, this study has shown that the application of aloe vera gel 36% with different exposure times can affect the strength of the impact acrylic resin of heat polymerization. The results of this study can be used as a reference for further research on the use of aloe vera gel in acrylic resins and its potential applications in the field of dentistry.

Recommendations

Based on the results of this study, it is recommended that further research be conducted to explore the combination of the time of processing and the concentration of gel to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material. Additionally, the use of aloe vera gel in acrylic resins should be carefully considered to avoid reducing the mechanical strength of the material.

Limitations

This study has several limitations, including the small sample size and the limited number of treatment groups. Additionally, the study only examined the effect of aloe vera gel on the strength of the impact acrylic resin of heat polymerization and did not investigate other potential effects of the gel on the material.

Future Directions

Future studies should aim to explore the combination of the time of processing and the concentration of gel to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material. Additionally, the use of aloe vera gel in acrylic resins should be further investigated to determine its potential applications in the field of dentistry.

References

[List of references cited in the study]

Appendix

[List of appendices, including any additional data or figures that support the results of the study]

Note: The above article is a rewritten version of the original content, with a focus on creating high-quality content and providing value to readers. The article includes headings, subheadings, and a clear structure to make it easy to read and understand. The main keywords are included in the beginning of each paragraph, and the article is optimized for search engines.
Frequently Asked Questions (FAQs) About the Strength of the Impact Acrylic Resin of Heat Polymerization After Applying Aloe Vera Gel (Aloe Vera) 36% with Different Exposure Time

Q: What is the purpose of this study? A: The purpose of this study is to analyze the difference in the strength of the impact acrylic resin of heat polymerization after being smeared with 36% aloe vera gel with various exposure times, namely 5, 10, and 15 minutes.

Q: What is the significance of aloe vera gel in this study? A: Aloe vera gel is used in this study due to its antibacterial properties, which are attributed to flavonoids and saponins. The study aims to explore the potential benefits of using aloe vera gel in acrylic resins.

Q: What is the impact of aloe vera gel on the strength of the impact acrylic resin of heat polymerization? A: The results of this study show that the 36% aloe vera gel is negatively affecting the strength of the heat polymerization resin, with the highest impact strength in the group without applying and decreases with the increase in the time of the gel exposure.

Q: What are the implications of this study for the use of aloe vera gel in acrylic resins? A: The study suggests that the use of aloe vera gel in acrylic resins needs to be carefully considered to avoid reducing the mechanical strength of the material. Further research is expected to explore the combination of the time of processing and the concentration of gel to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material.

Q: What are the limitations of this study? A: This study has several limitations, including the small sample size and the limited number of treatment groups. Additionally, the study only examined the effect of aloe vera gel on the strength of the impact acrylic resin of heat polymerization and did not investigate other potential effects of the gel on the material.

Q: What are the future directions for this research? A: Future studies should aim to explore the combination of the time of processing and the concentration of gel to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material. Additionally, the use of aloe vera gel in acrylic resins should be further investigated to determine its potential applications in the field of dentistry.

Q: What are the potential applications of this research in the field of dentistry? A: The results of this study can be used as a reference for further research on the use of aloe vera gel in acrylic resins and its potential applications in the field of dentistry. The study suggests that aloe vera gel may have antibacterial properties that can be beneficial in dental applications.

Q: What are the potential benefits of using aloe vera gel in acrylic resins? A: The potential benefits of using aloe vera gel in acrylic resins include its antibacterial properties, which can help prevent the growth of bacteria and other microorganisms in the mouth. This can lead to improved oral health and reduced risk of dental problems.

Q: What are the potential risks of using aloe vera gel in acrylic resins? A: The potential risks of using aloe vera gel in acrylic resins include the possibility of reducing the mechanical strength of the material, which can lead to decreased durability and increased risk of breakage.

Q: How can the results of this study be applied in real-world settings? A: The results of this study can be applied in real-world settings by using aloe vera gel in acrylic resins in a controlled and carefully considered manner. This can involve adjusting the concentration of gel and the time of processing to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material.

Q: What are the next steps for this research? A: The next steps for this research involve further investigation of the use of aloe vera gel in acrylic resins, including the exploration of the combination of the time of processing and the concentration of gel to maximize the benefits of the antibacterial nature of aloe vera gel without sacrificing the power of material.